View ASMT-MB00_4157692.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ASMT-Mx00
1 W Power LED Light Source
Data Sheet
Description
1W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed pad design has excellent heat transfer from the package to the motherboard. The Warm White Power LED is available in various color temperature ranging from 2600K to 4000K. The product has high Color Rendering Index (CRI) which provides excellent color perception and visual clarity. The low profile package design is suitable for a wide variety of applications especially where height is a constraint. The package is compatible with reflow soldering process. This will give more freedom and flexibility to the light source designer.
Features
* Available in Green, Blue, Cool White and Warm White color * Energy efficient * Exposed pad for excellent heat transfer * Suitable for reflow soldering process * High current operation * Long operation life * Wide viewing angle * Silicone encapsulation * ESD of 16kV * MSL 2A
Specifications
* InGaN technology * 3.6 V, 350 mA (typical) * 120 viewing angle
Applications
* * * * * Portable (flash light, bicycle head light) Reading light Architectural lighting Garden lighting Decorative lighting
Package Dimensions
10.00 1 2 3 ANODE CATHODE ANODE
3.30 8.50 METAL SLUG 3 1.27
5.26 10.60 8.50 8.00
1.30 1 2 2.00
5.25
0.81 5.08 LED + -
NOTES: 1. ALL DIMENSIONS IN MILLIMETERS. 2. TOLERANCE IS 0.1 mm UNLESS OTHERWISE SPECIFIED.
ZENER
Device Selection Guide at Junction Temperature Tj = 25C
Luminous Flux, fV[1,2] (lm) Color Green Blue Cool White Warm White Part Number ASMT-MG00 ASMT-MB00 ASMT-MW00 ASMT-MY00 Min. 25.5 5.5 43.0 43.0 Typ. 40.0 10.0 60.0 50.0 Max. 73.0 19.5 73.0 73.0 Test Current (mA) 350 350 350 350 Dice Technology InGaN InGaN InGaN InGaN
Notes 1. fV is the total luminous flux output as measured with an integrating sphere at 25 ms mono pulse condition. 2. Flux tolerance is 10 %.
2
Part Numbering System
ASMT-M x 00 - N x 1 x 2 x 3 0 Color Bin Selection Max Flux Bin Selection Min Flux Bin Selection Color B - Blue G - Green W - Cool White Y - Warm White
Absolute Maximum Ratings (TA = 25C)
Parameter DC Forward Current Power Dissipation LED Junction Temperature Operating Ambient Temperature Range Storage Temperature Range Soldering Temperature
Notes: 1. DC forward current - derate linearly based on Figure 5. 2. Pulse condition duty factor = 10%, Frequency = 1 kHz.
[1] [2]
ASMT-Mx00 350 500 1400 110 -40 to +85 -40 to +100 Refer to Figure 8
Units mA mA mW C C C
Peak Pulsing Current
Optical Characteristics (TA = 25 C)
Part Number ASMT- MG00 ASMT- MB00 Color Green Blue Peak Wavelength lPEAK (nm) Typ. 519 460 Dominant Wavelength lD [1] (nm) Typ. 525 467 Viewing Angle 2q1/2 [2] (Degrees) Typ. 120 120 Viewing Angle 2q1/2 [2] (Degrees) Typ. 110 110 Luminous Efficiency (lm/W) Typ. 32 8 Luminous Efficiency (lm/W) Typ. 48 40
Correlated Color Temperature, CCT (Kelvin) Part Number ASMT-MW00 ASMT-MY00 Color Cool White Warm White Min. 4000 2600 Max. 10000 4000
Notes: 1. The dominant wavelength, lD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. q1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3
Electrical Characteristic (TA = 25C)
Forward Voltage VF (Volts) @ IF = 350mA Dice Type InGaN Typ. 3.6 Max. 4.0 Reverse Voltage VR (Volts) Max. 5 Thermal Resistance Rqj-ms (C/W) [1] Typ. 10
Notes: 1. RqJ-ms is Thermal Resistance from LED junction to metal slug.
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 580 630 WAVELENGTH - nm 680 730 780
500
GREEN BLUE COOL WHITE WARM WHITE
450 FORWARD CURRENT - mA 400 350 300 250 200 150 100 50 0 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 FORWARD VOLTAGE - V
RELATIVE INTENSITY
Figure 1. Relative intensity vs. wavelength
1.4
Figure 2. Forward current vs. forward voltage
1.0 0.9 0.8
RELATIVE INTENSITY
RELATIVE LUMINOUS FLUX (V) - lm
1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 50 100 150 200 250 300 350 400 450 500 MONO PULSE CURRENT - mA
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -90 -70 -50 -30 GREEN BLUE COOL WHITE WARM WHITE -10 10 30 50 70 90
OFF-AXIS ANGLE ()
Figure 3. Relative luminous flux vs. mono pulse current
400
IF - MAXIMUM FORWARD CURRENT - mA
Figure 4. Radiation pattern
540
DOMINANT WAVELENGTH - nm
RJA = 50 C/W RJA = 40 C/W
350 300 250 200 150 100 50 0 0 10 20 30 40 50 60 70 80 90
530 520 510 500 490 480 470 460 450 100 150 200 250
GREEN
RJA = 30 C/W
BLUE
300
350
400
TA - AMBIENT TEMPERATURE - C
FORWARD CURRENT - mA
Figure 5. Maximum forward current vs. ambient temperature Derated based on TJMAX = 110C, RqJA = 30C/W, 40C/W and 50C/W
Figure 6. Dominant wavelength vs. forward current - InGaN devices
4
0.016 0.014 0.012
Y-COORDINATES
100 mA 150 mA
TEMPERATURE
10 - 30 SEC. 255 - 260 C 217 C 200 C 150 C 3 C/SEC. MAX. 60 - 120 SEC. 100 SEC. MAX. 3 C/SEC. MAX. -6 C/SEC. MAX.
0.01 0.008 0.006 0.004 0.002 0 0 350 mA 0.001 0.002 0.003 0.004 0.005 0.006 0.007 0.008 X-COORDINATES 300 mA 250 mA
TIME (Acc. to J-STD-020C)
Figure 7. Chromaticity shift vs. current *Note: (x,y) values @ 350 mA reference to (0.0)
Figure 8. Recommended reflow soldering profile
10.70 0.10
300 RELATIVE FORWARD VOLTAGE SHIFT (mV) 250 200 150 100 50 0 -50 -100 -150 -200 -250 -300 -40 -15 10 35 TEMPERATURE - C 60 85
8.40 0.10
17.00 0.20 1.00 0.10
3.1 0.10
5.08 0.10
Figure 9. Recommended soldering land pattern
Figure 10. Temperature vs. relative forward voltage shift
100 90 80 RELATIVE LOP (%) 70 60 50 40 30 20 10 0 25 30 35 40 45 50 55 60 65 70 75 80 85 90 GREEN BLUE COOL WHITE WARM WHITE 95 100 105 110
JUNCTION TEMPERATURE (C) Figure 11. Relative LOP vs. junction temperature
5
Flux Bin Limit (for reference only) [x1 x2]
Bin A B C D E F G H J K Flux (lm) at 350 mA Min. 5.5 7.0 9.0 11.5 15.0 19.5 25.5 33.0 43.0 56.0 Max. 7.0 9.0 11.5 15.0 19.5 25.5 33.0 43.0 56.0 73.0
Color Bin Limits
Blue A B C D Min. (nm) 460.0 465.0 470.0 475.0 Max. (nm) 465.0 470.0 475.0 480.0
Green A B C D
Min. (nm) 515.0 520.0 525.0 530.0
Max. (nm) 520.0 525.0 530.0 535.0
Tolerance for each bin limits is 10 %
Tolerance = 1 nm
Color Bin Selections [ X3 ]
Cool White
0 A B C D E F G H Z Y W V U T S Q P N M L K J 1 2 3 4 5 6 6
Individual reel will contain parts from one full bin only
Warm White
Full Distribution A only B only C only D only E only F only G only H only A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B and C only B, C and D only C, D and E only D, E and F only E, F and G only F, G and H only Special Color Bin A, B, C and D only E, F, G and H only B, C, D and E only C, D, E and F only A, B, C, D and E only B, C, D, E, and F only 0 A B C D E F Z Y W V U Q P N M J 1 2 3 4 5 6 Full Distribution A only B only C only D only E only F only A and B only B and C only C and D only D and E only E and F only A, B and C only B, C and D only C, D and E only D, E and F only Special Color Bin A, B, C and D only E, F, G and H only B, C, D and E only C, D, E and F only A, B, C, D and E only B, C, D, E, and F only
Primary Color Binning
Cool White Bin A Bin B Bin C Bin D Bin E Bin F Bin G Bin H Color Limits (Chromaticity Coordinates) X Y X Y X Y X Y X Y X Y X Y X Y 0.367 0.400 0.362 0.372 0.329 0.369 0.329 0.345 0.303 0.333 0.307 0.311 0.388 0.417 0.379 0.383 0.362 0.372 0.356 0.330 0.329 0.345 0.329 0.302 0.307 0.311 0.311 0.285 0.379 0.383 0.369 0.343 0.329 0.345 0.329 0.302 0.305 0.322 0.311 0.285 0.283 0.284 0.290 0.265 0.362 0.372 0.356 0.330 0.329 0.369 0.329 0.345 0.301 0.342 0.305 0.322 0.274 0.301 0.283 0.284 0.367 0.400 0.362 0.372 Warm White Bin A Bin B Bin C Bin D Bin E Bin F Color Limits (Chromaticity Coordinates) X Y X Y X Y X Y X Y X Y 0.452 0.434 0.438 0.403 0.407 0.393 0.395 0.362 0.381 0.377 0.373 0.349 0.488 0.447 0.470 0.414 0.418 0.422 0.407 0.393 0.387 0.404 0.381 0.377 0.470 0.414 0.452 0.384 0.452 0.434 0.438 0.403 0.418 0.422 0.407 0.393 0.438 0.403 0.424 0.376 0.438 0.403 0.424 0.376 0.407 0.393 0.395 0.362
Tolerances 0.01
Tolerances 0.01
0.44 0.42 0.40 0.38 Y - COORDINATE 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.24
0.48 0.46
G A C
5.6 k 4.0 k 4.5 k BLACK BODY CURVE
0.44 0.42 Y - COORDINATE 0.40 0.38 0.36 0.34 E 4.0k F 3.5k D A C 3.0k B 2.6k
B
H
E
10 k
7k
D
F
Black Body Curve
0.26
0.28
0.30
0.32
0.34 X-COORDINATE
0.36
0.38
0.40
0.42
0.44
0.32 0.34
0.36
0.38
0.40
0.42 0.44 X - COORDINATE
0.46
0.48
0.50
0.52
Sub-Color Binning Color Limits
Cool White Bin A1 Bin A2 Bin A3 Bin A4 Bin B1 Bin B2 Bin B3 Bin B4 Bin B5 Bin B6 Bin C1 Bin C2 Bin C3 Bin C4
(Only Applicable for Color Bin A to Bin D and Bin G to Bin H)
(Chromaticity Coordinates) X 0.364 0.367 Y 0.383 0.400 X 0.364 0.362 Y 0.383 0.372 X 0.329 0.329 Y 0.357 0.369 X 0.329 0.329 Y 0.345 0.357 X 0.362 0.360 Y 0.372 0.357 X 0.360 0.358 Y 0.357 0.343 X 0.358 0.356 Y 0.343 0.330 X 0.329 0.329 Y 0.331 0.345 X 0.329 0.344 Y 0.331 0.344 X 0.343 0.341 Y 0.331 0.314 X 0.329 0.329 Y 0.369 0.357 X 0.329 0.329 Y 0.357 0.345 X 0.314 0.315 Y 0.355 0.344 X 0.315 0.316 Y 0.344 0.333
0.348 0.385 0.346 0.359 0.348 0.385 0.347 0.372 0.344 0.344 0.343 0.331 0.341 0.314 0.346 0.359 0.343 0.331 0.329 0.302 0.315 0.344 0.316 0.333 0.303 0.333 0.305 0.322
0.347 0.372 0.347 0.372 0.347 0.372 0.346 0.359 0.346 0.359 0.344 0.344 0.343 0.331 0.344 0.344 0.329 0.320 0.329 0.320 0.314 0.355 0.315 0.344 0.301 0.342 0.303 0.333
Cool White Bin D1 Bin D2 Bin D3 Bin D4 Bin D5 Bin D6 Bin G1 Bin G2 Bin H1 Bin H2 Bin H3
Tolerances 0.01
(Chromaticity Coordinates) X 0.329 0.329 Y 0.345 0.331 X 0.329 0.329 Y 0.331 0.320 X 0.329 0.329 Y 0.320 0.302 X 0.316 0.317 Y 0.333 0.320 X 0.317 0.318 Y 0.320 0.310 X 0.318 0.320 Y 0.310 0.293 X 0.392 0.386 Y 0.421 0.400 X 0.386 0.382 Y 0.400 0.385 X 0.382 0.378 Y 0.385 0.370 X 0.378 0.375 Y 0.370 0.358 X 0.375 0.371 Y 0.358 0.344
0.317 0.320 0.318 0.310 0.320 0.293 0.307 0.311 0.309 0.300 0.311 0.285 0.364 0.383 0.362 0.372 0.360 0.357 0.358 0.343 0.356 0.330
0.316 0.333 0.317 0.320 0.318 0.310 0.305 0.322 0.307 0.311 0.309 0.300 0.367 0.400 0.364 0.383 0.362 0.372 0.360 0.357 0.358 0.343
0.44 0.42 0.40 0.38
A1 A3 C1 C3 C4 D4 7k D5 D6 10k C2 D1 D2 D3 A4 B4 5.6k B5 B6 A2 B1 B2 B3 H1 4.5k H2 H3 G1 G2 4.0k
Y - COORDINATE
0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.24 0.26 0.28 0.30
Black Body Curve
0.32
0.34
0.36
0.38
0.40
0.42
0.44
X - COORDINATE
8
Package Tube Dimensions
535
10.5
6.6
10.5
36.5
Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body (white epoxy).
This product is classified as moisture sensitive level 2A When the bag is opened, parts required to mount within 672 hours of factory conditions 30C/60%, and stored at <10% RH. Devices required bake, before mounting if: a) The humidity indicator card is >10% when read at 235C b) The pack has been opened for more than 672 hours. Baking recommended condition: 60 5C for 20 hours.
DISCLAIMER AVAGO'S PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AUTHORIZED FOR SALE AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE.
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0668EN AV02-0129EN - August 23, 2007

▲Up To Search▲

Price & Availability of ASMT-MB00

	To Download ASMT-MB00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .